阻燃控制電纜Flame Retardant Control Cable
一.適用范圍
本產品用于額定電壓450/750V及以下有阻燃要求的控制、監控回路及保護線路等場合。
Application
Applicable to the control system,controlloop andprotection cricuit(which request flame-retardant)with the rated voltage 450/750V(orlower)
二.執行標準
GB/T9330.2.3-2008
GB/T19666-2005(等同IEC6033160332)
mplementation ofstandards
GB/T9330.2.3-2008
GB/T19666-2005(equaltolEC60331,60332)
三.使用特性
1.導體最高工作溫度:聚氯乙烯絕緣70C,交聯聚氯乙烯絕緣90°C。
2.安裝敷設時環境溫度不低于0C。
3,安裝敷設時最小彎曲半徑:無鎧裝6X電纜外徑,有屏蔽層軟電纜6X電纜外徑,有鎧裝或銅帶屏蔽12X電纜外徑。
Using characteristics
1.The max working temperature of conductor(of a cable)is 70C(PVCinsulated): 90C(XLPEinsulated).
2.The ambient temperature forlayingiS notlowerthan 0C .
3.The least allowed bending radius steeltape-armoredcable is 6 times the outer diameter ofthe cable:6 times the outer diameter of the cable(the screensoft cable); steel tape-armored or cu tape armoredshield calble is 12 times the outer diameter ofthe cable
四、型號、名稱 Type and Denomination
型號 Type | 產品名稱 Denomination |
ZA(B、C、D)KVV | 聚氯乙烯絕緣聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed flame-retardant A(B.C.D)control cable |
ZA(B、C、D)KVVP | 聚氯乙烯絕緣編織屏蔽聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed braid shield flame-retardant A(B.C.D)control cable |
ZA(B、C、D)KVVP2 | 聚氯乙烯絕緣銅帶屏聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed Cu tape armored shield flame-retardant A(B.C.D)control cable |
ZA(B、C、D)KVVP3 | 聚氯乙烯絕緣鋁塑復合帶屏蔽聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed aluminum tape armored shield flame-retardant A(B.C.D)control cable |
ZA(B、C、D)KVV22 | 聚氯乙烯絕緣鋼帶鎧裝聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed steel tape armored flame-retardant A(B.C.D)control cable |
ZA(B、C、D)KVVP2-22 | 聚氯乙烯絕緣銅帶屏蔽鋼帶鎧裝聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed Cu tape armored shield control steel tape armored flame-retardantA(B.C.D)control cable |
ZA(B、C、DKVV32 | 聚氯乙烯絕緣細鋼絲鎧裝聚氯乙烯護套阻燃A(B、C、D)類控制電纜 PVC insulated and sheathed steel wire braid flame-retardant A(B.C.D)control cable |
ZA(B、C、D)KVVR | 聚氯乙烯絕緣聚氯乙烯護套阻燃A(B、C、D)類軟控制電纜 PVC insulated and sheathed flame-retardant A(B.C.D) soft control cable |
ZA(B、C、D)KVVRP | 聚氯乙烯絕緣編織屏蔽聚氯乙烯護套阻燃A(B、C、D)類軟控制電纜 PVC insulated and sheathed braid shielded flame-retardant A(B.C.D) soft control cable |
ZA(B、C、D)KYJV | 交聯聚乙烯絕緣聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed flame-retardent A(B.C.D)control cable |
ZA(B、C、D)KYJVP | 交聯聚乙烯絕緣編織屏蔽聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed b raid shield flame-retardent A(B、C、D)control cable |
ZA(B、C、D)-KYJVP2 | 交聯聚乙烯絕緣銅帶屏蔽聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed Cu tape armored shield flame-retardent A(B.C.D)control cable |
ZA(B、C、D)KYJVP3 | 交聯聚乙烯絕緣鋁塑復合帶屏蔽聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed aluminum tape armored shield flame-retardent A(B.C.D)control cable |
ZA(B、C、DKYJV22 | 交聯聚乙烯絕緣鋼帶鎧裝聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed steel tape armored flame-retardent A(B.C.D)control cable |
ZA(B、C、D)-KYJVP2-22 | 交聯聚乙烯絕緣銅帶屏蔽鋼帶鎧裝聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed Cu tape armored shield control steel tape armored A(B.C.D)control cable |
ZA(B、C、D)KYJV32 | 交聯聚乙烯絕緣細鋼絲鎧裝聚氯乙烯護套阻燃A(B、C、D)類控制電纜 XLPE insulated PVC sheathed steel wire braid A(B.CD)control cable |
五、規格范圍 Specification range
型號 Typ | 標稱截面mm2 Nominal cross section area mm2 | ||||||
0.75 | 1.0 | 1.5 | 2.5 | 4 | 6 | 10 | |
芯數 Core NO. | |||||||
ZA(B,C,D)-KVV ZA(B,C,D)-KVVP ZA(B,C,D)-KYJV ZA(B,C,D)-KYJVP | 2-61 | 2-14 | 2-10 | ||||
ZA(B,C,D)-KVVP2 ZA(B,C,D)-KVVP3 ZA(B,C,D)-KYJVP2 ZA(B,C,D)-KYJVP3 | 4-61 | 4-14 | 4-10 | ||||
ZA(B,C,D)-KVV22 ZA(B,C,D)-KVVP2-22 ZA(B,C,D)-KYJV22 ZA(B,C,D)-KYJVP2-22 | 7-61 | 4-61 | 4-14 | 4-10 | |||
ZA(B,C,D)-KVV32 ZA(B,C,D)-KVJV32 | 7-61 | 4-61 | 4-14 | 4-10 | |||
ZA(B,C,D)-KVVR | 2-61 | 4-14 | 4-10 | ||||
ZA(B,C,D)-KVVRP | 2-61 | 4-14 | 4-10 |
六、主要技術參數 Technolgicalparameters
序號 No | 項目 Project | 單位 Unit | 指標 Index | 試驗方法 Test method |
1 | 電纜結構及導體電阻 Cable structure and conductor resistance | 符合GB/T3956-2008標準(IEC60228:2004) Complies with the standard ofGB/T3956-2008(IEC60228:2004) | GB/T3048.4-2007 | |
2 | 絕緣線芯交流50Hz火花試驗 Spark test(AC.Voltage 50Hz) | KV | 6 | GB/T3048.9-2007 |
3 | 工頻5min電壓試驗 Frequency(5min)voltage test | KV | 3 | GB/T3048.8-2007 |
4 | 絕緣線芯電壓試驗 Insulation voltage test 0.6mm及以下≤0.6mm 0.6mm及以上=0.6mm | KV | 2 2.5 | GB/T3048.8-2007 |
2.阻燃性能Flame-retardant
A單根阻燃性能A Single-core flame-retardant
代號Code | 代號Code試樣外徑D Specimen diameter(mm) | 供火時間 For fire time index(S) | 合格指標 Complianceindex | 試驗方法 Test method |
Z | D≤25 | 60 | 試樣燒焦應不超過距上夾具下緣50mm-540mm的范圍之外 Specimen char is far from fixture50mm-540mm | GB/T18380.1-2001 (IEC60332-1:1993) GB/T18380.2-2001 (IEC60332-2-25:1989) |
25<D≤50 | 120 | |||
50<D≤75 | 240 | |||
D>75 | 480 |
B成束阻燃性能B The bundle flame-retardant
代號Code | 試樣非金屬材料體積(L/m) Volume ofspecimenno-metallic material(L/m) | 供火時間 For fire timeindex | 合格指標 Compliance index | 試驗方法 Test method |
ZA ZB ZC ZD | 7 3.5 1.5 0.5 | 40 40 20 20 | 1.試樣上炭化的長度最大不應超過距噴嘴底邊向上2.5m; Specimen carbonation is far from theedge of nozzle as 2.5m 2.停止供火后試樣上的有焰燃燒時間不應超過1h The flaming time is no longer than 1hafter fired | GB/T18380.3-2001(IEC60332-3:1992)(IEC60332-3-25:2000) |